This is a model of an old sidebuilding at my childhood home. The scale of the model is 1:100 and the size of it's base 25*25 cm. The blossoming lawn has been created by scattering dyed sawdust on green paint and a layer of glue still wet.
Shortly in Finnish: Tämä on pienoismalli lapsuuden kotitilastani Asikkalassa. Materiaalina on käytetty pääasiassa pahvia ja pienoismalli on upotettu lasikantisen sohvapöydän sisään. Jouduin tekemään pöytään ylimääräisen välipohjan valkopintaisesta vaneerista, muuten tämä malli oli sopivin pienoismallia varten.
There's a few words I'd like to share with you about using 3d-terrain and/or maps/tiles - what to use and why, and share my experiences about some maps and tiles I've used. And while I love modelling and creating cool terrain setups in my games, I've been moving towards using map tiles in my games instead of 3d props, and there's several reasons for that, which I'm going to tell you more about below. I've also added a few review-ish about tiles/terrains on this post.
It's time for another terrain -related article, this time it's one of my personal favourites. The fountain can be used in almost any genre as they are present everywhere, and modelling streaming water was an interesting project. This article shows you phase by phase how the model was made, allowing you to create fountains and other water-filled elements of your own.
What fantasy (or medieval) roleplaying game wouldn't need a temple? Here's one I made to put adjecent to marketplaces and other convinient spots on the game table.
Base phases of the construction. The temple's main material is cardboard, pillars are semi-corrugated cardboard wrapped around pieces of wooden staff and stairs are foamcore with some filler/glue applied to them.
Here's a few pics from the model of my home farm in Asikkala where I grew up, to be a gift for my father. Above, you can see all but one of the buildings in the model. The models I've created before and given as a gift, now I'll create the terrain around and build it inside a glass -covered table.
I used to run a D20 Star Wars campaign years ago, and I created some At-St walkers for it. I created an original piece and then made a mold of it and created a few pieces. I used my AT-AT model kit and the chicken walkers with paper miniatures and they worked well. This was before I got addicted to plastic Star Wars miniatures.
I didn't buy the At-At miniature, but I've been using this kit with the miniatures. Even if it's a bit small to be used with the miniatures, it looks ok if there's no other vehicles around, but even if there is it's still better than nothing.
While browsing through old photos, I found a few modelling/WIP photos of perhaps the most popular content of this site - miniature -scale Scratchbuilt Star Wars starships collection. I uploaded them here and at the same time, separated WIP pics and tutorials from the original Star Wars scratchbuilt starship models post to reduce the size and put them here to create one separate WIP/tutorial post. And sorry for rss spamming - I needed to change the title more relevant.